Keeping your garage door in top shape is a must for ensuring a safe and secure environment for your home. There are several maintenance tips that you can follow to keep your garage door in good working order. These tips include adjusting the tension of the torsion springs, lowering the friction between the door and the track, and preventing corrosion.

Adjusting the tension of the torsion springs

Whether you are installing a new garage door or you need to adjust the tension of the torsion springs, it is important that you know the right steps to follow. This will prevent you from injuring yourself or damaging your property. It is also important that you have the proper safety equipment.

First, you will need to have all the tools you need. These include a C-clamp, a sturdy ladder, masking tape, a marker, and an adjustable wrench. You will also need safety glasses and a hard hat.

Adjusting the tension of the lift cable system

Getting the correct tension on your lift cable system is a crucial part of your garage door maintenance plan. A loose cable is an easy way to cause your garage door to be off track. This can be dangerous to both you and your property. A well-trained technician will know how to properly adjust your Garage Door Repair Services In Bellaire TX to keep it running smoothly.

The most basic of garage door mechanisms, the counterbalance system is comprised of cables, pulleys, brackets and other hardware. The system is composed of three main parts: the top bracket, the middle bracket and the bottom bracket.

Adjusting the tension of the rollers

Changing the tension of your garage door rollers is an important maintenance task. You want to make sure you are not damaging your doors, cables and motor. If you have any doubts, call in a qualified technician to make the necessary adjustments.

Aside from the obvious, there are a few tricks to keep in mind. The most obvious is to be careful when replacing your old weather seal. If you do not replace it, moisture will build up and rust the metal over time. It is also a good idea to inspect your wooden garage door for warping and damage.

Adjusting the tension of the counterbalance mechanism

Typically, torsion springs are used to counterbalance Overhead Garage Door Repair Services In Bellaire TX. Torsion springs must be wound carefully to achieve a high spring tension. If a spring is too tight, it can cause noisy and dangerous conditions. If a spring is too loose, it can cause injury.

Typical counterbalance mechanisms require two torsion springs to be wound back-to-back. This type of system can be complicated and expensive to maintain and install. Using a single torsion spring allows a simpler installation and provides the ability to adjust the tension of the spring.

Infrared safety eye system causes garage door to reverse

Typically, an infrared safety eye system is installed to reverse the direction of a garage door as it is being closed. The system works by using an infrared beam to detect any obstructions that may prevent the door from closing. If the beam is obstructed, the system will send out a signal to the motor controller to reverse the direction of the Garage Door Repair Services In Bellaire TX.

An infrared safety eye system is generally set up on either side of a garage door and consists of an infrared transmitter, an infrared receiver, a motor, and a control circuit. The photoelectric sensors are placed at six inches above the floor.

Reducing friction between the door and the track

Keeping a door in tip top shape can be as simple as a good ole fashion cleaning. One of the simplest ways to keep the door squeaky clean is to replace the worn out lubricant with the next generation of motor oil. This will give you a dependable door for years to come. You may also want to consider a new set of hinges or an upgrade to the existing set. Taking the time to check out your rig on a regular basis will save you money in the long run.